Type: | Induction Heating Machine |
---|---|
Certification: | CE, ISO |
Structure: | Horizontal Type |
Brand: | Ronen |
Input Voltage: | 380V |
Heating Material: | 30mnsi,30si |
Suppliers with verified business licenses
Steel material:30MnSi,30Si.
Product diameter:φ7.1~φ12.6mm, Standard: JIS G 3137
Specifications |
7.1mm |
9.0mm |
10.7mm |
12.6mm |
Line speed |
60-110m/min |
40-100m/min |
30-90m/min |
20-60m/min |
Quenching temperature |
860ºC-960ºC |
860ºC-960ºC |
860ºC-960ºC |
860ºC-960ºC |
Tempering temperature |
360ºC-460ºC |
360ºC-460ºC |
360ºC-460ºC |
360ºC-460ºC |
Consumption per ton |
≤375kW.h/T |
≤370kW.h/T |
≤370kW.h/T |
≤370kW.h/T |
Strength of Extansion |
>1420MPa |
>1420MPa |
>1420MPa |
>1420MPa |
Yield strength |
>1275N/mm2 |
>1275N/mm2 |
>1275N/mm2 |
>1275N/mm2 |
Elongation |
>5% |
>5% |
>5% |
>5% |
Running speed:
For makingφ7.1mm,Rated speed: 100m/min; Max. speed: 110 m/min(2.07t/h);
For makingφ9.0mm,Rated speed: 90m/min; Max. speed: 100m/min(3.01 t/h);
For makingφ10.7mm,Rated speed: 65m/min; Max. speed: 80m/min(3.18t/h);
For makingφ12.6mm,Rated speed: ≥40m/min;Max. speed: 50m/min(2.94t/h);
Heating temperature:
Max.Quenching temperature:950°C
Max.Tempering temperature:450°C
Electricity consumption/T: at the highest quench/temper temperature, diameter isφ9.0mm, the consumption is <390KW/h per ton.
Production line center level:1000mm
Equipment composition and Process flow:
On-line equipment:
Pay-off stand→Wire pack up device→Mechanical descaling→Bright die and Notching die→Drawing→Straightening→1#Traction machine→Pre-heating power supply(600kW/8kHz IGBT Intermediate frequency induction heating power supply)→Temperature raising power supply(200kW/30kHz IGBT Superaudio induction heating power supply)→ Temperature raising power supply(200kW/50kHz IGBT Superaudio induction heating power supply)+Quenching/Holding→Quenching water tank →Temper power supply(300kW/8kHz IGBT Intermediate frequency induction heating power supply)+Temper and holding pipe→Temper water tank→2#Traction machine→Wire leading tank→Hydraulic shearing/reverse machine→Take up coil 1→Take up coil 2
Electrical Control:
Electrical appliance introduction
IGBT Induction heating power supply feature
1. Main elements are Germany SIEMENS 400A/1200V big power IGBT consist parallel circle, have a good capability of frequency automatic tracking
2. Voltage/Current double closed circuit control, this mode has constant voltage operation feature, it means the voltage of inductors will not be influenced by Inlet voltage/Load resistor, etc. Constant voltage make the load heating most stable
3. Adopt the most advanced control technology in the world. By a intelligent programming device CPLD, make IGBT induction heating power supply has the function of Fixed-angle&Phase locking/Frequency automatic tracking, etc. This design can improve the stability and efficiency. Because the machine has protect function of Over-frequency or Low-frequency unlock, it can accurately protect wire heating inductors from short circuit and open circuit fault
4. Inverter circuit has function of Fixing angle/ Frequency tracking and control. When the operation condition is changing, the phase angle of inverter will not change, it has wide frequency suitable range
5. Frequency sweep method: High accuracy of phase locking frequency, small attack. Start success ratio is 100%. Power regulating range: 10%-100%
6. IGBT Induction heating device has wide application in heating treatment.
Product Catalogue
The leading technology and quality----The complete production lines |
PC (Prestressed Concrete) steel bar production lines |
PC (Prestressed Concrete) steel wire production lines |
PC (Prestressed Concrete) Strand wire production line |
Spring steel wire quenching and tempering production line |
High Ductility Cold rolled ribbed steel bar production line |
The leading technology and quality---- induction heating equipments |
MOSFET solid state high frequency welder |
IGBT solid state medium frequency/super audio frequency induction heating equipments |
SCR medium frequency induction heating equipments |
vacuum tube high frequency welder and induction heating equipments |
All-digital control DC drive and large power DC power supply units |
CNC numerical control and PLC control standard & non-standard quenching machine tools, production line electric control complete equipments |
low voltage power network harmonic suppression and dynamic reactive power compensation devices. |
Not only the Good Machine, but also the Most Attentive Service
If any doubt,feel free to contact us with no doubt!
RONEN always here for you!!
Suppliers with verified business licenses