| After-sales Service: | Provided |
|---|---|
| Warranty: | 3 Years |
| Type: | Induction Heating Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Parameters|
Specifications |
7.1mm |
9.0mm |
10.7mm |
12.6mm |
|
Line speed |
60-110m/min |
40-100m/min |
30-90m/min |
20-60m/min |
|
Quenching temperature |
860ºC-960ºC |
860ºC-960ºC |
860ºC-960ºC |
860ºC-960ºC |
|
Tempering temperature |
360ºC-460ºC |
360ºC-460ºC |
360ºC-460ºC |
360ºC-460ºC |
|
Consumption per ton |
≤375kW.h/T |
≤370kW.h/T |
≤370kW.h/T |
≤370kW.h/T |
|
Strength of Extansion |
>1420MPa |
>1420MPa |
>1420MPa |
>1420MPa |
|
Yield strength |
>1275N/mm2 |
>1275N/mm2 |
>1275N/mm2 |
>1275N/mm2 |
|
Elongation |
>5% |
>5% |
>5% |
>5% |
Steel material:30MnSi,30Si.
Product diameter:φ7.1~φ12.6mm, Standard: JIS G 3137
Running speed:
For makingφ7.1mm,Rated speed: 100m/min; Max. speed: 110 m/min(2.07t/h);
For makingφ9.0mm,Rated speed: 90m/min; Max. speed: 100m/min(3.01 t/h);
For makingφ10.7mm,Rated speed: 65m/min; Max. speed: 80m/min(3.18t/h);
For makingφ12.6mm,Rated speed: ≥40m/min;Max. speed: 50m/min(2.94t/h);
Heating temperature:
Max.Quenching temperature:950°C
Max.Tempering temperature:450°C
Electricity consumption/T: at the highest quench/temper temperature, diameter isφ9.0mm, the consumption is <390KW/h per ton.
Production line center level:1000mm
Equipment composition and Process flow:
On-line equipment:
Pay-off stand→Wire pack up device→Mechanical descaling→Bright die and Notching die→Drawing→Straightening→1#Traction machine→Pre-heating power supply(600kW/8kHz IGBT Intermediate frequency induction heating power supply)→Temperature raising power supply(200kW/30kHz IGBT Superaudio induction heating power supply)→ Temperature raising power supply(200kW/50kHz IGBT Superaudio induction heating power supply)+Quenching/Holding→Quenching water tank →Temper power supply(300kW/8kHz IGBT Intermediate frequency induction heating power supply)+Temper and holding pipe→Temper water tank→2#Traction machine→Wire leading tank→Hydraulic shearing/reverse machine→Take up coil 1→Take up coil 2
Electrical Control:
Electrical appliance introduction
IGBT Induction heating power supply feature
1. Main elements are Germany SIEMENS 400A/1200V big power IGBT consist parallel circle, have a good capability of frequency automatic tracking
2. Voltage/Current double closed circuit control, this mode has constant voltage operation feature, it means the voltage of inductors will not be influenced by Inlet voltage/Load resistor, etc. Constant voltage make the load heating most stable
3. Adopt the most advanced control technology in the world. By a intelligent programming device CPLD, make IGBT induction heating power supply has the function of Fixed-angle&Phase locking/Frequency automatic tracking, etc. This design can improve the stability and efficiency. Because the machine has protect function of Over-frequency or Low-frequency unlock, it can accurately protect wire heating inductors from short circuit and open circuit fault
4. Inverter circuit has function of Fixing angle/ Frequency tracking and control. When the operation condition is changing, the phase angle of inverter will not change, it has wide frequency suitable range
5. Frequency sweep method: High accuracy of phase locking frequency, small attack. Start success ratio is 100%. Power regulating range: 10%-100%
6. IGBT Induction heating device has wide application in heating treatment.Product Catalogue
|
The leading technology and quality----The complete production lines |
|
PC (Prestressed Concrete) steel bar production lines |
|
PC (Prestressed Concrete) steel wire production lines |
|
PC (Prestressed Concrete) Strand wire production line |
|
Spring steel wire quenching and tempering production line |
|
High Ductility Cold rolled ribbed steel bar production line |
|
The leading technology and quality---- induction heating equipments |
|
MOSFET solid state high frequency welder |
|
IGBT solid state medium frequency/super audio frequency induction heating equipments |
|
SCR medium frequency induction heating equipments |
|
vacuum tube high frequency welder and induction heating equipments |
|
All-digital control DC drive and large power DC power supply units |
|
CNC numerical control and PLC control standard & non-standard quenching machine tools, production line electric control complete equipments |
|
low voltage power network harmonic suppression and dynamic reactive power compensation devices. |
Not only the Good Machine, but also the Most Attentive Service
If any doubt,feel free to contact us with no doubt!
RONEN always here for you!!
){kind=link}